Problem with Norton and the board / Can't see pics posted here?

[Laura]

ok so here is my problem... i cannot see any new posts unless i disable my norton... it didn't used to be like this, i dont know what anyone in my house did, does anyone have this problem or know how to fix it?

[jarmo]

Maybe you need to add heretodaygonetohell.com to the list of allowed sites in Norton?




/jarmo

[GypsySoul]

I had that problem too, Laura.? Here's the instructions on how to add a site to the Norton allowed list:

1.? Open Norton Internet Security
2.? (under the heading 'Settings for') Click on to highlight "Privacy Control"
3.? Click "Configure" (on mine it's the second button in yellow on the lower right side of the window)
4.? Click "Advance"
5.? Click "Add Site" (lower left side of the window).? A new site/domain box appears.? Enter the name of the site that you want to receive and click OK.? The site name appears in the left frame of the Options window.
6.? Click (to highlight) the name of the new site (on that left side).
7.? Click the Global Settings tab (on the top right side).
8.? In the "Information about visited sites" section, clear "Use default setting."
9.? Click Permit.
10.? Click OK to close the Options window.



Hope that helps.?

P.S.? You may need to restart your computer for that to take effect (but I really don't remember if I had to or not)

[Laura]

problem fixed! thank you so very much!

[Gunner80]

Get rid of that bloated software and try Zonealam. It's free and hasn't been hacked yet.

[the dirt]

Anyone have any suggestions for those of us who use zone alarm security suite?

I also use the windows firewall and popup blocker; maybe they're conflicting...

[badapple81]

My Windows picks up on the fact that I have Norton and uses Norton as it's firewall instead of the Windows version. Not sure about zone alarm 

[GypsySoul]

My Windows picks up on the fact that I have Norton and uses Norton as it's firewall instead of the Windows version. Not sure about zone alarm?

My computer recognizes and uses my Norton too but I also needed to TURN OFF THE WINDOWS FIREWALL.

@ the dirt - maybe that's what you need to do to get your Zonealarm to work? (I really don't know.? I'm just guessing here.)

if your computer screen looks like mine, this is how I was able to check:
go to Control Panel
go to Security Center

now at this point I see three blue lines - Firewall - Automatic Updates - Virus Protection - and all of them have a green "ON" light next to them.? below that it says "Manage secuirty setting for:? Internet Options - Automatic Updates - Windows Firewall...

click on Windows Firewall
choose Off
EVEN THOUGH IT'LL NOW SAY AT THE TOP "YOUR PC IS NOT PROTECTED: TURN ON WINDOWS FIREWALL, I think this is where your Zonealarm will take over? (when I click on the blue Firewall with the green on light, it tells me that my Norton firewall is on)

click OK (this is to complete turning off the Windows Firewall)

So anyways ... maybe now you'll be able to add HTGTH in your Zonealarm allowed list? (Again, I really don't know.? I'm just guessing here.)

Good Luck.




P.S.? probably the only reason that I "needed" to turn off my Windows Firewall was because I don't know how to configure it.? ?

[the dirt]

Thanks for trying to help; I still can't get things right, we'll see

[GypsySoul]

Maybe you can find the help you need on this ZoneAlarm forum:
http://forums.zonelabs.com/zonelabs


I found this thread about not being able to see pics in the ZoneAlarm Configuration section ... "Unable to see some photos on msn groups site":
http://forums.zonelabs.com/zonelabs/board/message?board.id=cfg&message.id=29331#M29331


Maybe the fix you need is the same as this??

[the dirt]

Cool Gypsy, I'm gonna check the links you posted out

 

[KeVoRkIaN]

Scrap 'em all and get Nod 32 

[Mandy.]

I also have a problem...
I use Norton as the antivirus and Zone Alarm as the firewall, and I can't see the smilies as animation, they are all still.

I've never even realised that until last week when I posted on the board from the school library. As a matter of fact, I can't see any gif on any website.

Anyone knows what that is?
And by the way, when I go to Privacy > Options > Ad Blocking, and there are those boxes and the Ads to Block, animation, pop up and banner are not ticked, which means it might not be the firewall configuration.

[GypsySoul]

@ MandyGnR

Did you follow the instructions in Reply #2 above?


you can also try following the instructions Jarmo posted in this thread:
http://www.heretodaygonetohell.com/board/index.php?topic=7.msg7#msg7


Hope it helps.

[Mandy.]

I had followed it but it was nothing to do with the browser, and it wasn't only on this board.

Anyway, I managed to figure out what was wrong, and it was some firewall settings.

But thanks 

[GypsySoul]

Anyway, I managed to figure out what was wrong, and it was some firewall settings.

Could you post step-by-step instructions on how you fixed it in case someone else is having the same problem.

[Mandy.]

Anyway, I managed to figure out what was wrong, and it was some firewall settings.

Could you post step-by-step instructions on how you fixed it in case someone else is having the same problem.

Okay.

This is for those who use Zone Alarm as a firewall.

Go to:
Privacy > Main > Ad Blocking > Off


This will unblock pop up, animation and banners.
But you can always choose the Custom option if you just want to unblock/block one or two of them.