Here Today... Gone To Hell!

Wake up, it's time to play! => Nice Boys Don't Play Rock And Roll => Topic started by: electricmage on March 21, 2005, 03:04:55 AM



Title: So i'm confused about the mid boost with slash's setup...
Post by: electricmage on March 21, 2005, 03:04:55 AM
so it sounds to me like slash is running an eq boost with the mids on high. Is he boosting the guitar into the amp, or is he eq-ing the hole stup with an FX loop? and how can he boost his solos if he is using and eq all the time? a volume pedal maybe? help me out here darkburst.


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: BP on March 21, 2005, 12:41:59 PM
I think the control room/board does the switching for him on the most part. because I would study his feet :D

he use to run a Boss EQ GE-7 in the loop with delay.   More recently he just changed to a different EQ in which I forget the name right now.

bp

JCM800's have a fx loop right?


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: *Izzy* on March 21, 2005, 02:41:41 PM
I dunno, this might help:? "A Bradshaw/Custom Audio Electronics splitter/switcher selects between two pairs of Slash signature model Marshall JCM heads - one for dirty the other for clean. In one of the effects loops sits a Rocktron Hush IICX noise gate, along with an MXR 10 band? EQ (for lead boost) and a Boss DD-3 delay. The other loop is dry exept for the Hush."

That extract is from an interview with Adam Day, hope it helps? : ok:

 :smoking: Izzy? :smoking:


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: Darkburst on March 21, 2005, 03:52:10 PM
I dunno, this might help:? "A Bradshaw/Custom Audio Electronics splitter/switcher selects between two pairs of Slash signature model Marshall JCM heads - one for dirty the other for clean. In one of the effects loops sits a Rocktron Hush IICX noise gate, along with an MXR 10 band? EQ (for lead boost) and a Boss DD-3 delay. The other loop is dry exept for the Hush."

That extract is from an interview with Adam Day, hope it helps? : ok:

 :smoking: Izzy? :smoking:

What he said!

 ;D


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: electricmage on March 21, 2005, 07:18:16 PM
I dunno, this might help:? "A Bradshaw/Custom Audio Electronics splitter/switcher selects between two pairs of Slash signature model Marshall JCM heads - one for dirty the other for clean. In one of the effects loops sits a Rocktron Hush IICX noise gate, along with an MXR 10 band? EQ (for lead boost) and a Boss DD-3 delay. The other loop is dry exept for the Hush."

That extract is from an interview with Adam Day, hope it helps? : ok:

 :smoking: Izzy? :smoking:

So he EQs the whole tone if the MXR 10 band is in the FX loop. And to answer a previous post; he new JCM800 reissue has a built in FX loop. Sadly, the 80's does not, as mine does not. But on the good side, mine is all vintage, not some reissue. I don't think those things sound that good anyways,  tried one at Sam Ash...


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: Darkburst on March 21, 2005, 09:07:11 PM
The EQ is only turned on during solos. I think it'll work as a boost either way but will sound slightly different through the loop.


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: electricmage on March 21, 2005, 10:23:28 PM
thats kind of nutty. He gets such high Mids through his amp. I'm attempting to achieve a certain mid boost when using the neck pickup to make it more potent, but it doesn't even out the bridge to well... boosting any mid and teble sliders gives me a thin sound, but when i boost the bass, the neck pickup presence diminishes.


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: electricmage on March 21, 2005, 10:24:58 PM
maybe I am looking at this eq pedal all wrong. Is it not

Bass-MID-Treble, sliders left to right?


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: sg4eva on April 19, 2005, 08:40:09 AM
Don't forget that he also uses the EQ boost to get some wild feedback during the songs.


Title: Re: So i'm confused about the mid boost with slash's setup...
Post by: MXR on September 23, 2005, 06:34:56 AM
Hi just talked to Adam (Slash's tech) by e-mail,about Slash pedal settings....
MXR 10 band EQ and Boss DD-3 on effect loop.
MXR setting: An upside down smile, means a midrange boost fading off at high treble and bass sliders, with gain slider at +6 and volume sliders at 0;
Boss Delay is setting as a slapback with level at 11 o'clock, feedback at 10 o' clock, delay time at 8 o' clock, and mode at 800 ms.
Hope it helps.


Mario